Hosa IRG-100.5 6 inch Standard Patch Cord With 1/4 inch ends.

Connectors: Low-profile Right-angle to Same
Conductor: 24 AWG OFC
Shield: 80% OFC Spiral
6 inches long

Hosa MHE-125 Headphone Extension Cord Stereo 3.5mm Male to Stereo 3.5mm Female.

Nickel-plated contacts for rugged durability and efficient signal transfer
Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
OFC spiral shield for effective EMI and RFI rejection and flexibility
25 feet long

Hosa MID-310BK Standard MIDI Cable with Molded Plugs. Quite possibly the most popular MIDI cable on the planet. All Hosa MIDI cables are wired 5-PIN discrete. All five Pins are connected.

Nickel-plated plugs for rugged durability and efficient signal transfer
Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
OFC spiral shields for effective EMI and RFI rejection and flexibility
10 feet long

Hosa MID-320BK Standard MIDI Cable with Molded Plugs.

Nickel-plated plugs for rugged durability and efficient signal transfer
Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
OFC spiral shields for effective EMI and RFI rejection and flexibility
20 feet long

Hosa MIT-129 1/4″ Female Hi-Z to XLR Male Lo-Z. 50KΩ High-Z to 200Ω Low-Z.

Maximizes signal fidelity when using impedance mismatched gear
Minimizes high frequency and level loss caused by signal reflections
Eliminates noise and hum caused by an impedance mismatch

Hosa MIT-156 Line Matching Transformer. 600ohm Low-Z to 2500ohm Medium-Z. Matches microphones with XLR connectors to 3.5mm inputs found on Personal Portable Recording Devices, Camcorders, and Computers.

Hosa MIT-435 XLR Female Lo-Z to 1/4″ Male Hi-Z. 200ohm Low-Z to 50Kohm High-Z.

Maximizes signal fidelity when using impedance mismatched gear
Minimizes high frequency and level loss caused by signal reflections
Eliminates noise and hum caused by an impedance mismatch

Hosa PHB-350 The PHB-350 is a Balanced (TRS) 1/4″ half-normalled patch bay. De-Normalled (straight through) operation is possible by rotating the individual internal channel modules. Includes detailed instructions.

Hosa PWC-403 Grounded, 3-Wire IEC Type Power Cable, 18 AWG.

Oxygen-Free Copper (OFC) conductors for increased current flow
Black PVC jacket for durability and low visibility on stage
Intended for use in North America and with NEMA 5-15 receptacles
Length 3ft.

Hosa RMC-180 Standard Rack Screw And Washer. 24 Pcs.

Hosa STP-202 Single 1/4″ TRS to Two 1/4″ TS. From Mixer’s Channel Insert Point to the In and Out of a 1/4″-equipped piece of outboard gear.

Nickel-plated plugs for rugged durability and efficient signal transfer
Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
OFC spiral shields for effective EMI and RFI rejection and flexibility
2 meters long

Hosa STP-204 Single 1/4″ TRS to Two 1/4″ TS. From Mixer’s Channel Insert Point to the In and Out of a 1/4″-equipped piece of outboard gear.

Nickel-plated plugs for rugged durability and efficient signal transfer
Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
OFC spiral shields for effective EMI and RFI rejection and flexibility
4 meters long

Hosa STX-110F Balanced, XLR Female to 1/4″ TRS Phone.

Nickel-plated plugs for rugged durability and efficient signal transfer
Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
OFC spiral shield for effective EMI and RFI rejection and flexibility
10 feet long

Hosa STX-110M Balanced, XLR Male to 1/4″ TRS Phone.

Nickel-plated plugs for rugged durability and efficient signal transfer
Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
OFC spiral shield for effective EMI and RFI rejection and flexibility
10 feet long

Hosa TRS-202 Single 1/4″ TRS to Two RCA. From Mixer’s Channel Insert Point to the In and Out of a RCA-equipped piece of outboard gear.

Nickel-plated plugs for rugged durability and efficient signal transfer
Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
OFC spiral shields for effective EMI and RFI rejection and flexibility
2 meters long

Hosa TRS-204 Single 1/4″ TRS to Two RCA. From Mixer’s Channel Insert Point to the In and Out of a RCA-equipped piece of outboard gear.

Nickel-plated plugs for rugged durability and efficient signal transfer
Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
OFC spiral shields for effective EMI and RFI rejection and flexibility
4 meters long

Hosa YPP-106 Mono 1/4″ Female to Two Mono 1/4″ Males.

Connectors: 1/4 in TSF to Dual 1/4 in TS

Hosa YPP-117 Stereo 1/4″ Male to Two Mono 1/4′ Females.

Connectors: 1/4 in TRS to Dual 1/4 in TSF

Hosa YPP-118 Stereo 1/4″ Male to Two 1/4″ Stereo Females.

Connectors: 1/4 in TRS to Dual 1/4 in TRSF

Hosa YPR-102 Stereo 1/4″ Male to Two RCA Females.

Connectors: 1/4 in TRS to Dual RCAF

Hosa YPR-103 Mono 1/4″ Male to Two RCA Females.

Connectors: 1/4 in TS to Dual RCAF

Hosa YRA-104 RCA Male to RCA Females.

Connectors: RCA to Dual RCAF

Hosa YRA-105 RCA Female to 2 RCA Males.

Hosa YXM-121 Y-Cable, XLR Female to Two XLR Males.

XLR connectors with internal strain relief for rugged reliability
Oxygen-Free Copper (OFC) conductors for enhanced signal clarity
OFC spiral shields for effective EMI and RFI rejection and flexibility