Features a military style backing.

Great for your hat, tie, or lapel.

The new and improved Mini Max Power Sluice Concentrator is the multi-tool of prospecting. We have changed our updated machine from a double pump system to one single, larger pump. The new pump provides not only greater water flow and higher head lift but also a larger diameter pressure hose which creates a higher flow than the double pump system. We’ve also doubled the hose length to 8 feet, added a new ball valve for precise flow control and a screw on connector that requires no tools.

Whether you are working river banks, desert placer’s or just cleaning concentrates for larger dredges and equipment, the Mini Max is a prospecting tool that will always be part of your arsenal. This multi purpose package includes a removable mat for the lower sluice box, converting it to a professional clean up machine simly by sliding out the green rubber riffle and replacing it with Miracle Matting. It is also supplied with an additional finer woven mesh screen on the top hopper for using it as a concentrating system. Another new improvement is that the Mini Max is powered by a single 2200 GPH, 12 volt pump made proudly in the U.S.A. The top hopper is equipped with a flood header that provides smooth water flow through the trough, over a slick plate and in to a 6 inch section of miracle mat that gives you a preview to any captured gold! The top sluice lifts off easily so you can inspect the lower sluice, eliminating the need for cleaning. The material is then washed over a removable classifier grizzly screen, removing the oversized waste gravel. The bottom sluice box is lined with our green rubber riffle that recovers ultra fine gold and can handle larger volumes of material. When used as a concentrating system, the lower sluice is partially covered by oversized expanded metal. When used as a power sluice you can expect a capacity of up to a quarter of a yard per hour and about a third of its capacity when used as a concentrating machine. This Mini Max can also be operated by a small, single gas powered pump such as our P90G Pump Kit. This device is ideal for back packing given it folds up into an compact size of 36 by 14 by 7 inches and weighs under 23 pounds. The four independent legs fold up with our new pin-lock folding system with large wing nuts that make it a breeze to adjust elevation and articulation. Thw Mini Max also includes a mountable flare for use as a hand sluice.

Net weight 23 pounds.

Great for cleaning the concentrates for large trommel operations down to super concentrates.

Can be used to highbank in areas that have large amounts of black sand and garnets that plug up standard riffle configurations.

All sluices are lined with our new rubber molded “Miracle Matting Riffle “ that is acclaimed to be the most effective gold separating device on the market. The sluice box is 6 feet in length and 24 inches wide. The sluice breaks down into two connecting sections, each with supporting adjustable legs. The top hopper is designed with 3/16 inch woven wire mesh to reduce the size of material entering the recovery box. Capacity 1 1/2 cubic yds. per hour.

Features a military style backing.

Great for your hat, tie, or lapel.

A specially designed jet tube is slightly larger than the inside of the suction hose, eliminating any obstructions in the power jet.

The quick coupler is glued onto the end of your dredge hose to allow fast connection to the power jet.

A specially designed jet tube is slightly larger than the inside of the suction hose, eliminating any obstructions in the power jet.

The quick coupler is glued onto the end of your dredge hose to allow fast connection to the power jet.

They key is in the small ribs that help capture and trap the fine gold that would have been washed away without it!

Matting is sold in units that are 12 inches wide by 36 inches in length.

This suction nozzle works with 2.5 inch suction hose and has a net weight of 3.5 pounds. A 1.25 inch pressure hose is easily secured to the nozzle with a 1.25 inch threaded coupling.

Proper width of the sluice box used with this nozzle should be 10 inches to 12 inches wide.

Suggested engine/pump combinations are: GHX50/P90, GHX50/HP100, GX120/HP200.

Adds extra support for the hopper when expanding an A52 sluice box into a highbanker system.

Also provides extra room to create a low pressure zone at the head of the box to collect the fine gold.

Often gold claims are hard to access, and having an extra pump seal can save time; since it can be changed in the field with simple hand tools.

For Honda GX120, GX160, and GX200 engines with 5/8 inch shaft

Often gold claims are hard to access, and having an extra pump seal can save time; since it can be changed in the field with simple hand tools.

For Honda GX270 and GX390 engines with 1 inch shaft