American DJ Professional Quality High Temperature Gel (Color Filter) Sheet, 21″ x 22″, Amber

American DJ Professional Quality High Temperature Gel (Color Filter) Sheet, 21″ x 22″, Aqua

American DJ Professional Quality High Temperature Gel (Color Filter) Sheet, 21″ x 22″, Blue

American DJ Professional Quality High Temperature Gel (Color Filter) Sheet, 21″ x 22″, Dark Blue

American DJ Professional Quality High Temperature Gel (Color Filter) Sheet, 21″ x 22″, Green

American DJ Professional Quality High Temperature Gel (Color Filter) Sheet, 21″ x 22″, Light Green

American DJ Professional Quality High Temperature Gel (Color Filter) Sheet, 21″ x 22″, Magenta

American DJ Professional Quality High Temperature Gel (Color Filter) Sheet, 21″ x 22″, Orange

American DJ Professional Quality High Temperature Gel (Color Filter) Sheet, 21″ x 22″, Pink

American DJ Professional Quality High Temperature Gel (Color Filter) Sheet, 21″ x 22″, Purple

American DJ Professional Quality High Temperature Gel (Color Filter) Sheet, 21″ x 22″, Red

American DJ Professional Quality High Temperature Gel (Color Filter) Sheet, 21″ x 22″, Yellow

Class D amp with Crown’s ultra-efficient DriveCore technology weighs less than 11 lb
Higher DSP capabilities: More control; has band pass filter per channel
Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venues
Selectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven at full power
Set sleep mode after specified time without having to press a button
Security setting disables menu buttons; menu locked/unlocked by entering combination
System reset allows factory settings to be restored
Remote power trigger
Peakx™ Limiters provide maximum output while protecting your speakers
XLR, 1/4″, RCA inputs provide flexibility
Integrated PureBand™ Crossover System for better performance and control
Efficient forced-air fans prevent excessive thermal buildup

Sensitivity 1.4Vrms
Frequency Response +0dB, -1dB
Signal to Noise > 97dB (at .775Vrms sensitivity, 6dB lower)
Intermodulation Distortion < 0.3% Damping Factor > 200
THD < 0.5% Crosstalk At 1kHz: > 85dB, At 20kHz: > 55dB
Dimensions 19″ (48.3 cm) x 3.5″ (8.9 cm) x 7.7″ (19.6 cm)
Weight 8.6 lbs (3.9 kgs)

UPC 691991000935

215 watts 8 ohms dual, 350 watts 4 ohms dual, 550 watts 2 ohms dual, 700 watts 8 ohms bridged, 1100 watts 4 ohms bridged

Crown XLS Series 2 Manual

Class D amp with Crown’s ultra-efficient DriveCore technology weighs less than 11 lb
Higher DSP capabilities: More control; has band pass filter per channel
Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venues
Selectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven at full power
Set sleep mode after specified time without having to press a button
Security setting disables menu buttons; menu locked/unlocked by entering combination
System reset allows factory settings to be restored
Remote power trigger
Peakx™ Limiters provide maximum output while protecting your speakers
XLR, 1/4″, RCA inputs provide flexibility
Integrated PureBand™ Crossover System for better performance and control
Efficient forced-air fans prevent excessive thermal buildup

Sensitivity 1.4Vrms
Frequency Response +0dB, -1dB
Signal to Noise >103dB (at .775Vrms, 6dB lower)
Intermodulation Distortion < 0.3%
Damping Factor > 200
THD < 0.5%
Crosstalk At 1kHz: > 85dB, At 20kHz: > 55dB
Dimensions 19″ (48.3 cm) x 3.5″ (8.9 cm) x 7.7″ (19.6 cm)
Weight 8.6 lbs (3.9 kgs)

UPC 691991001000

300 watts 8 ohms dual, 525 watts 4 ohms dual, 775 watts 2 ohms dual, 1050 watts 8 ohms bridged, 1550 watts 4 ohms bridged

Crown XLS Series 2 Manual

Class D amp with Crown’s ultra-efficient DriveCore technology weighs less than 11 lb
Higher DSP capabilities: More control; has band pass filter per channel
Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venues
Selectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven at full power
Set sleep mode after specified time without having to press a button
Security setting disables menu buttons; menu locked/unlocked by entering combination
System reset allows factory settings to be restored
Remote power trigger
Peakx™ Limiters provide maximum output while protecting your speakers
XLR, 1/4″, RCA inputs provide flexibility
Integrated PureBand™ Crossover System for better performance and control
Efficient forced-air fans prevent excessive thermal buildup

Sensitivity 1.4Vrms
Frequency Response +0dB, -1dB
Signal to Noise >103dB (at .775Vrms, 6dB lower)
Intermodulation Distortion < 0.3%
Damping Factor > 200
THD < 0.5%
Crosstalk At 1kHz: > 85dB, At 20kHz: > 55dB
Dimensions 19″ (48.3 cm) x 3.5″ (8.9 cm) x 10.7″ (21.2 cm)
Weight 10.8 lbs (4.9 kgs)

375 watts 8 ohms dual, 650 watts 4 ohms dual, 1050 watts 2 ohms dual, 1300 watts 8 ohms bridged, 2100 watts 4 ohms bridged

UPC 691991001086

Crown XLS Series 2 Manual

Class D amp with Crown’s ultra-efficient DriveCore technology weighs less than 11 lb
Higher DSP capabilities: More control; has band pass filter per channel
Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venues
Selectable input sensitivity; 1.4Vrms and .775Vrms options so that amp can be driven at full power
Set sleep mode after specified time without having to press a button
Security setting disables menu buttons; menu locked/unlocked by entering combination
System reset allows factory settings to be restored
Remote power trigger
Peakx™ Limiters provide maximum output while protecting your speakers
XLR, 1/4″, RCA inputs provide flexibility
Integrated PureBand™ Crossover System for better performance and control
Efficient forced-air fans prevent excessive thermal buildup

Sensitivity 1.4Vrms
Frequency Response +0dB, -1dB
Signal to Noise >103dB (at .775Vrms, 6dB lower)
Intermodulation Distortion < 0.3%
Damping Factor > 200
THD < 0.5%
Crosstalk At 1kHz: > 85dB, At 20kHz: > 55dB
Dimensions 19″ (48.3 cm) x 3.5″ (8.9 cm) x 10.7″ (21.2 cm)
Weight 10.8 lbs (4.9 kgs)

UPC 691991001161

440 watts 8 ohms dual, 775 watts 4 ohms dual, 1200 watts 2 ohms dual, 1550 watts 8 ohms bridged, 2400 watts 4 ohms bridged

Crown XLS Series 2 Manual

PRODUCT DETAILS

Peakx™ Limiters: Peakx limiters provide the ultimate in performance and protection for your entire system. This advanced algorithm was specifically developed and tuned to work with this amplifier and power-supply to achieve higher SPL will less audible artifacts. This means less distortion, less shutdowns, and maximum safe power delivered to your speakers. The Peakx limiters can be easily turned on or off by channel right from the front panel eliminating the need to be digging around in the back of the dark rack.

Subharmonic Synth: Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning.

Fan Mode Controls: Three user-defined fan mode controls – normal, early and fullspeed – for matching fan performance to a specific application.

Presets: Increased number of presets to a total of 50; 49 of which are user definable.

Warranty: Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications.

SPECIFICATIONS

XTi Manual

Features

Specifications
Input Connectors: 1/4″ TRS, female XLR (pin 2 hot)
Input Impedance: >50kΩ balanced, >25kΩ unbalanced
Max Input: >+24dBu, Balanced or Unbalanced
Input Type: Electronically balanced/unbalanced, RF filtered
Sidechain: 1/4″ TRS Phone, Normalled: Ring = Output (send); tip = Input (return)
Sidechain Impedance: Tip = >10kΩ (Input), Ring = 2kΩ (Output)
Sidechain Max Input Level: >+20dBu (tip/input); >+20dBu (ring/output)
Output Connectors: 1/4″ TRS, female XLR (pin 2 hot)
Output Impedance: 120Ω balanced, >60Ω unbalanced
Max Output: +21dBu balanced/unbalanced into 2kΩ or greater; >+18 dBm balanced/unbalanced (into 600Ω)
Frequency Response: 20Hz – 20kHz; +0, -0.5dB, Typical 3dB points are 0.35Hz and 110kHz, unity gain
Noise: <-90dBu, 22Hz to 22kHz, no weighting, unity gain
THD+Noise: Typically <0.04%; Any Amount of Compression Up to 40dB@1kHz
IMD: Typically <0.08% SMPTE @ +10dBu (15dB Gain reduction) Compressor Threshold Range: -40dBu to +20dBu Compressor Threshold Characteristic: Selectable OverEasy® or hard knee Compressor Ratio: Variable; 1:1 to Infinity:1; 60dB Maximum Compression Compressor Attack Time: Variable program-dependent; 3ms to 340ms for 15dB gain reduction Compressor Release Time: Variable program-dependent; 200dB/Sec to 3dB/Sec Expander/Gate Threshold Range: OFF to +15dBu Expander/Gate Ratio: 10:1 Expander/Gate Max Depth: >60dB
Expander/Gate Attack Time: <500µs (from Maximum Depth) Expander/Gate Release Time: Adjustable, 30ms to 3sec (to 30dB attenuation) Limiter Threshold Range: 0dBu to +20dBu CMRR: >40dB, typically >55dB at 1kHz
Interchannel Crosstalk: <-80dB, 20Hz to 20kHz Dynamic Range: >115 dB, unweighted
Stereo Coupling: True RMS Power Summing™
Power Consumption: 15 Watts Maximum
Operating Temperature: 0°C to 45°C (32°F to 113°F)
Dimensions: 1.75″ x 19″ x 6.75″ (4.45 cm x 48.2 cm x 17.15 cm)
Unit Weight: 5.05 lb (2.29 kg)
Shipping Weight: 7.20 lb (3.27 kg)
Reference: 0dBu = 0.775Vrms
Operating Voltage: 100 VAC 50/60Hz; 120VAC 60Hz; 230 VAC 50/60 Hz

UPC 691991401268

dbx 166XS Data Sheet

dbx 166XS Manual

When the pros need an EQ, they turn to dbx. With a proven track record that spans four decades, dbx® EQs are the industry standard for touring, studios, and audio installations. With the dbx heritage of revered pro EQs, the 215s meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls.

The dbx 215s includes two 15-band channels of 2/3-octave equalization, ±12 dB input gain, switchable ±6 dB or ±12 dB boost/cut range, 20mm nonconductive sliders, an intuitive user interface, and output level metering. From its extended 10Hz to 50kHz frequency response and 112 dB dynamic range to the quality componentry and meticulous attention to detail, the 215s offers exceptional sound and rugged reliability that guarantees you will always sound your best.

Sure to find a home in the studio, on tour and with installed sound venues, the dbx 215s is destined to take its rightful place in the lineage of great dbx signal processors that are the professional’s choice in signal processing. With such affordable quality, there’s no longer any excuse for compromising your sound.

Specifications
Input Connectors 1/4″ TRS, female XLR (pin 2 hot)
Input Type Electronically balanced/unbalanced, RF filtered
Input Impedance Balanced 40 kOhm, unbalanced 20 kOhm
Max Input >+21dBu balanced or unbalanced
CMRR >40dB, typically >55dB at 1kHz
Output Connectors 1/4″ TRS, male XLR (pin 2 hot)
Output Type Impedance-balanced/unbalanced, RF filtered
Output Impedance Balanced 100 ohm, unbalanced 50 ohm
Max Output >+21dBu balanced/unbalanced into 2 kOhm or greater; >+18dBm balanced/unbalanced (into 600 ohm)
Bandwidth 20Hz to 20kHz, +0.5/-1dB
Frequency Response <10Hz to >50kHz, +0.5/-3dB
Dynamic Range Typically >112dB
Signal to Noise Ratio Typically >95dB
THD+Noise <0.003%
Interchannel Crosstalk <-90db, 20Hz to 20kHz
Bypass Switch Bypasses the graphic equalizer section in the signal path
Low cut Switch Activates the 50Hz 12dB/octave Bessel high-pass filter
Range Switch Selects either +/- 6dB or +/- 12dB slider boost/cut range
Operating Voltage 100VAC-240VAC 50/60Hz
Power Consumption 15W
Power Connector IEC receptacle
Unit Weight 4.8 lbs.(2.2 kg)
Shipping Weight 6.2 lbs.(2.8kg)
Dimensions 1.75″ (4.4cm) H x 6″(15.24cm) D x 19″ (48.26cm) W

dbx 215S Dual Channel 15 Band Equalizer Manual

When the pros need an EQ, they turn to dbx. With a proven track record that spans four decades, dbx® EQs are the industry standard for touring, studios, and audio installations. With the dbx heritage of revered pro EQs, the 231s meets the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls.

The dbx 231s includes two 31-band channels of 1/3-octave equalization, ±12 dB input gain, switchable ±6 dB or ±12 dB boost/cut range, 20mm nonconductive sliders, an intuitive user interface, and output level metering. From its extended 10Hz to 50kHz frequency response and 112 dB dynamic range to the quality componentry and meticulous attention to detail, the 231s offers exceptional sound and rugged reliability that guarantees you will always sound your best.

Sure to find a home in the studio, on tour and with installed sound venues, the dbx 231s is destined to take its rightful place in the lineage of great dbx signal processors that are the professional’s choice in signal processing. With such affordable quality, there’s no longer any excuse for compromising your sound.

Specifications
Input Connectors 1/4″ TRS, female XLR (pin 2 hot)
Input Type Electronically balanced/unbalanced, RF filtered
Input Impedance Balanced 40k ohm, unbalanced 20k ohm
Max Input >+21dBu balanced or unbalanced
CMRR >40dB, typically >55dB at 1kHz
Output Connectors 1/4″ TRS, male XLR (pin 2 hot)
Output Type Impedance-balanced/unbalanced, RF filtered
Output Impedance Balanced 100 ohm, unbalanced 50 ohm
Max Output >+21dBu balanced/unbalanced into 2k ohm or greater; >+18dBm balanced/unbalanced (into 600 ohm)
Bandwidth 20Hz to 20kHz, +0.5/-1dB
Frequency Response <10Hz to >50kHz, +0.5/-3dB
Dynamic Range Typically >112dB
Signal to Noise Ratio Typically >95dB
THD+Noise <0.003%
Interchannel Crosstalk <-90dB, 20Hz to 20kHz
Bypass Switch Bypasses the graphic equalizer section in the signal path
Low cut Switch Activates the 50Hz 12dB/octave high-pass filter
Range Switch Selects either +/- 6dB or +/-12dB slider boost/cut range
Operating Voltage 100-240VAC 50/60Hz
Power Consumption 15W
Power Connector IEC receptacle
Unit Weight 6.2 lbs.(2.81 kg)
Shipping Weight 7.9 lbs.(3.58kg)
Dimensions 3.5″ (8.9cm) H x 6″(15.24cm) D x 19″ (48.26cm) W

dbx 231S Dual Channel 31 Band Equalizer Manual

AUTOEQ™

New, improved AutoEQ algorithm ensures an extremely accurate, fast, and non-intrusive automatic EQ experience.

With the RTA Mic “listening” to your room, the new, updated DriveRack PA2 AutoEQ algorithm sets speaker levels and room EQ automatically in a matter of seconds. This means room adjustments can now be made very quickly, without subjecting the audience to annoying, lengthy broadcasts of pink noise.

ENHANCED AFS™ FEEDBACK ELIMINATION

Enhanced AFS™ algorithm for faster, more precise feedback elimination, without adversely affecting your system’s tone.

Nothing turns audiences away like annoying and potentially painful audio feedback. Fortunately, dbx engineers have revisited their already-stellar Advanced Feedback Suppression algorithm and made it work even better. The DriveRack PA2 listens for and anticipates feedback and adjusts speaker output automatically before it even has a chance, while never altering your sound.

UPDATED WIZARD SETUP FUNCTIONS

Updated Wizards make initial set up easy, while ensuring speaker tunings and other settings are up-to-date.

Wizard functions on the DriveRack PA2 guide you through easy, step-by-step processes to help you get the most from your loudspeaker system. Helps you easily configure level balancing, AutoEQ, Advanced Feedback Suppression, and provides access to built-in and constantly updating speaker tunings from most major speaker manufacturers.

AVAILABLE INPUT PROCESSING
dbx Compression
AFS™ (Advanced Feedback Suppression)
Graphic EQ
8-Band Parametric EQ (adjusted when using the AutoEQ)
Subharmonic Synthesis

AVAILABLE OUTPUT PROCESSING
Crossover (supports full range, 2-way, and 3-way systems)
8-Band Parametric EQs (used for speaker tunings)
dbx Limiting
Driver Alignment Delays

Features
All New Setup Wizard
Streamlined AutoEQ™
All New AFS™ (Advanced Feedback Suppression)
Mobile Control (Android®, iOS®, Mac®, Windows®)
dbx Compression
Graphic EQ
8-Band Parametric EQ (adjusted when using the AutoEQ) Input
Subharmonic Synthesis
Crossover (supports full range, 2-way, and 3-way systems)
8-Band Parametric EQs (used for speaker tunings) Output
dbx Limiting
Driver Alignment Delays

TESTED WIRELESS ROUTERS:
Dlink 636L
Dlink Cloud router 2000
Cisco / linksys: WRT54G2V1
Netgear WGR614 v7
Netgear WNR 1000
(Other routers are likely compatible. This list represents those which have been tested thus far.)

Specifications
Input: (2) line inputs. (1) RTA Mic input
Input Connectors: (2) Female XLR line inputs. (1) Female XLR RTA Mic input
Input Type: Electronically balanced/RF filtered
Input Impedance: >50 kohm
A/D Converter: dbx Type IV™ Conversion System
CMRR: > 45dB
Mic Preamp Phantom Power: +15VDC (RTA)
Mic Preamp Equivalent Input Noise (EIN): < -117dB, 22Hz-22kHz, 150 ohm (RTA) Output: (6) Line Outputs Output Connectors: Male XLR Output Type: Electronically balanced, RF filtered Output Impedance: 120 Ω Max Output: +20dBu A/D Dynamic Range: 112 dB A-weighted, 110 dB unweighted Type IV Dynamic Range: 123 dB with transient material, A-weighted, 22kHz BW; 121 dB with transient material, unweighted, 22kHz BW; 115 dB typical with program material, A-weighted, 22kHz BW Input Delay Length: 100ms Alignment Delay: 10ms per channel (60ms total) Sample Rate: 48kHz Dynamic Range: >110 dB A-weighted, >107dB unweighted
THD+Noise: 0.003% typical at +4dBu, 1kHz, 0dB input gain
Frequency Response: 20Hz – 20kHz, +/- 0.5dB
Interchannel Crosstalk: < -110 dB, -120dB typical (input-to-output: < -100 dB)
Operating Voltage: 100-120VAC 50/60 Hz – EU: 220-240 VAC 50/60 Hz
Power Consumption: 22 W
Unit Weight: 5.25 lbs. (2.4 kg)
Shipping Weight: 6.75 lbs. (3.1 kg)
Dimensions: 1.75” (H) x 5.75” (D) x 19” (W), 4.4cm (H) x 14.6cm (D) x 48.26cm (W)
D/A Dynamic Range: 112 dB A-weighted, 110dB unweighted

DriveRack PA2 Manual

Passport CONFERENCE is ideal for an array of applications, including education, sporting and worship events; meetings, seminars and presentations; and gigs at parties, small clubs and coffeehouses.

When you need a portable PA system, go with Fender Passport and go with the original. Fender Passport—Sound that Travels

Model Name: Passport® CONFERENCE, 120V, Black
Model Number: 6945000000
Series: Passport®
Color: Black
Amplifier Type: Class-D
Controls: Tone Control on Each Channel, Volume, Master Volume, 20db Pad
Voltage: 120V
Wattage: 175 Watts
Inputs: Nine – (Three XLR, Five 1/4″, One Stereo 1/8″)
Headphone Jack: 1/8″ Stereo wtih Level Control
Line Out: One – (1/8″ Stereo with Level Control)
Speaker Jack: Two 1/4″ Left and Right (Stereo)
Channels: Five – (Three Mic/Line, One Stereo 1/4″ Line)
Horn Tweeter: Four – 2.75″ Articulated HF Tweeters
Cabinet Material: Molded Plastic
Handle: Integrated Top-Mount Handle
Front Panel: High Contrast for High Visibility in Low-Light Conditions
Amplifier Depth: 10″ (25.4 cm)
Amplifier Width: 25″ (63.5 cm)
Amplifier Height: 19″ (485 mm)
Amplifier Weight: 30 lbs. (13.61 kg)
Speaker: Two – 5.25″ Woofers
Unique Features: 175 watts of power—ample for small to medium-size audiences, International voltage operation (100V-120V / 220V-240V), Five-channel mixer lets you intuitively mix lecture panels and small musical ensembles, XLR and 1/4” mic/line inputs for flexible source connectivity, Volume and tone controls—custom tailor your mix on each channel, 1/8” stereo input—play recorded material from a mobile device or laptop, 1/8” stereo output for headphone monitoring and sending stereo mixes.
Knobs: Soft-Touch Radial Controls
Accessories: Two Speaker Cables and Detachable Power Cable

With easy-to-use features and great go-anywhere portability, the Passport® Conference Series 2 audio system is ideal for small to medium-size audiences. With Bluetooth® audio streaming, its full-range speakers, versatile features, friendly front-panel controls and 175 watts of power provide clear and reliable Fender sound ideal for a wide range of uses—educational, sporting and worship events; meetings, seminars and presentations; and musical performances at parties, small clubs, coffeehouses and much more.

Conveniently self-contained with suitcase-style portability and easy setup, Passport Conference Series 2 has everything you need for great sound anywhere, anytime.

Model Name: Passport® Conference Series 2, Black, 120V
Model #: 6942000000
Series: Passport®
Country Of Origin: CN
Color: Black
Weight: 31 lbs. (14.06 kg)

Part Number 6942000000

UPC 885978347209

With versatile controls and connectivity, the Passport Event portable audio system is perfect for amplifying your voice, instrument and background music anytime and anywhere. Its full-range speakers, versatile features, friendly front-panel controls and 375 watts of sonic power provide powerful, clear and reliable Fender sound ideal for gigs at parties, small clubs and coffeehouses; education, sporting and worship events; meetings, seminars, presentations and more.

Conveniently self-contained with go-anywhere suitcase-style portability, easy setup, Passport Event also features Bluetooth® connectivity for streaming wireless audio from mobile devices.

ELECTRONICS
VOLTAGE: 120V
CONTROLS: Volume, Treble, Bass, Reverb level and 20dB Pad Per Channel, Hi-Z Instrument/Line Switch, Bluetooth Pair Switch, Master Volume
CHANNELS: Seven – (Four XLR Mic/Line, One Instrument/Line, One Stereo 1/4″ / 1/8″ / Bluetooth)
INPUTS: Eleven – (Four XLR Mic/Line, One 1/4″ Instrument/Line, One Stereo 1/4″, One Stereo 1/8″, One Stereo Bluetooth)
LINE OUT: Three – One Stereo 1/8″ Phones/Line, One 1/4″ Mono, One 1/4″ Sub Out
SPEAKER JACK: Two 1/4″ Left and Right (Stereo)

HARDWARE
CABINET MATERIAL: Molded Plastic
FRONT PANEL: High Contrast for High Visibility in Low-Light Conditions
HANDLE: Integrated Top-Mount Handle

SPEAKERS
SPEAKERS: Two – 8″ Fender® Special Design

UPC 885978416523

DOES NOT COME WITH MIC AND CABLE SHOWN IN VIDEO ANYMORE!