Adjustable knob control on headphones
Utilizes 1/4 inch jack
Stretchable cable
Padded Earphones

Other Pro-Pointer AT Features:

Patented Proportional Audio/Vibration
Patented scraping blade for searching soil
Twice the battery life of other pinpointers with LED lights.
Pinpointing tip and 360° detection area
LED Flashlight for low light uses.
Includes woven belt holster and 9-volt battery.
Large power button

Specifications
Model Name:  Garrett Pro-Pointer® AT
Product Number:  1140900
Operating Temperatures:  -35°F (-37°C) to 158°F (70°C)
Operating Frequency:  11.5 kHz
Waterproof Rating:  10 foot (3 meter) maximum depth; IP 68
Tuning:  Automatic or manual retune
Indicators:  Proportional audio/vibration pulse rate
Controls:  Power, Retune, Adjust switch
Dimensions:  Length: 9″ (22.9 cm)
Thickness:  1.5″ (3.8 cm) tapered to .875″ (2.2 cm)
Weight:  6.5 oz. (0.2 kg.), with battery in
Battery:  Single 9V (included)
Battery Life:  Carbon: 16 hours  Alkaline: 30 hours
Rechargeable:  8 hours
Warranty:  2 Years, Limited Parts/Labor
Patent Information:  US 7,575,065 and patents pending

Garrett Pro-Pointer AT Manual

Key Features

Freedom—all the benefits of using headphones, without being tied to your metal detector.
Lightning-fast speed—Near-zero delay (17-milliseconds) from your detector to your headphones. Six times faster than Bluetooth speed, and up to four times faster than other wireless headphone kits.
Versatility—Nearly universal; designed to work with most detector brands and most wired headphones.
Frequency-Hopping Technology—Creates an infinite number of channels to prevent interference with nearby headphones and wireless devices.
Extended Hunting Time—Get up to 30 hours of operation per charge. Recharge the Z-Lynk modules with any micro-USB charging port—on your laptop, in your car, or with a USB power block such as a smartphone charger.
Can be used on both VLF (single frequency) and pulse (multi-frequency) detectors.
Additional Info:
Recharge the Z-Lynk transmitter and receiver modules with the supplied cables by attaching them to a laptop, your vehicle’s USB port, or a phone charger’s USB power block.
Each module has an Auto-Off function that will switch off power after 30 minutes of inactivity.

Specifications

Speed: 17 millisecond delay (6 times faster than Bluetooth)
Operating Frequency: 2.4 GHz band frequency hopping
Environmental: Water resistant; do not submerge.
WR-1 (receiver): IP 52: protects against light rain.
WT-1 (transmitter): IP 64: protects against heavy rain.
Battery type: Rechargeable Lithium Ion
Charging: Micro-USB charging port (cables included)
Operating time: 30 hours per charge (approx.)
Warranty: 2 years, limited parts and labor
Certifications: FCC, CE, IC
Operating Temperature: -20° (-4° F) to 60° C (140° F)

Garrett Z-Lynk Headphone Wireless System Manual

Application: High quality headphones are available to provide you with the ability to hear faint, deep treasure with crisp clear sound. Headphones provide full ear coverage effectively blocking external noise, such as wind, traffic, other detectors, etc.

Can also be connected to a WM 08 Wireless Audio Module (NOTE the WM 08 is not waterproof!)

Connection: 1/8 inch jack.

Model# 3011-0372

UPC 811493016757

Application: High quality headphones are available to provide you with the ability to hear faint, deep treasure with crisp clear sound. Headphones provide full ear coverage effectively blocking external noise, such as wind, traffic, other detectors, etc.

Fits X-TERRA 705 Gold Pack, X-TERRA 705, X-TERRA 505, X-TERRA 305, Safari, Explorer SE Pro, E-TRAC, Eureka Gold, GPX 5000, GPX 4800, GPX-4500.

100 ohm 6.35mm (1/4 inch) jack.

UPC 811493013954

PRO-FIND Series pinpointers help you to accurately locate targets inside a small hole or crevice where a metal detector coil cannot fit. This results in smaller holes, less environmental disruption and faster target recovery time.

Features:

Splash proof design: Rugged, splash proof design for rainy conditions. The perfect companion for a waterproof detector.

Audio indication: Audio tones intensify as the probe approaches the target, making target location easier than ever.

High visibility – with lost-alarm: The PRO-FIND’s bright yellow handgrip is clearly visible for easy location, so you won’t leave it behind after you dig. Quickly locate your forgotten pinpointer with the handy lost-alarm.

Holster included: Semi-rigid holster that attaches to most belts will keep your PRO-FIND at the ready.

Probe side sensitivity: Probe side detection area (360 degrees) allows targets to easily be located in the walls of the hole.

Auto power off: To save battery life, the PRO-FIND 15 switches off after eight minutes of inactivity.

VLF Technology: VLF (Very Low Frequency) is a conventional single frequency sine wave transmission technology. This reliable design has greater noise immunity to variable ground conditions.

Detector Interference Free technology: The advanced design of the PRO-FIND 15 removes false signals and noise, commonly associated with other pinpointers. DIF technology eliminates interference with an operating metal detector, when it is switched off, by disengaging the coil’s magnetic field.

Specification
Target Identification: No
Sensitivity: Fixed
Waterproof: Splash proof only
Audio Indication: On only
Vibration indication: No
LED Flashlight: No
Battery: 9V PP3 (not included)
Battery Life: 30 hours nominal
Length: 237 mm (9.3″)
Weight: 193 g (6.82 oz)
Accessories: Holster

Part# 3226-0002

UPC 811493016399

Minelab Pro-Find 15 Manual

PRO-FIND Series pinpointers help you to accurately locate targets inside a small hole or crevice where a metal detector coil cannot fit. This results in smaller holes, less environmental disruption and faster target recovery time.

Features:

Ferrous Tone ID: Two different responses help you to identify ferrous junk from nonferrous treasure. Great to use with non-discriminating detectors.

Waterproof to 3 m (10-ft): Rugged waterproof design ideal for beach and river pinpointing. The perfect companion for a waterproof detector.

Audio & vibration indication: Audio tones and vibration intensify as the probe approaches the target making target recovery easier, especially underwater!

Adjustable sensitivity: Five sensitivity levels allow you to precisely adjust for maximum depth and minimum noise in all ground conditions. Easily adjustable with separate +/– buttons.

High visibility – with lost-alarm: The PRO-FIND’s bright yellow handgrip is clearly visible for easy location, so you won’t leave it behind after you dig. Quickly locate your forgotten pinpointer with the handy lost-alarm.

Holster & lanyard included: A lanyard and a tough, semi-rigid holster that attaches to most belts will keep your PRO-FIND at the ready.

Probe side sensitivity: Probe side detection area (360 degrees) allows targets to easily be located in the walls of the hole.

Auto power off: To save battery life, the PRO-FIND 35 switches off after eight minutes of inactivity.

LED flash light: Easily see targets when pinpointing in low light conditions and in deep holes.

VLF Technology: VLF (Very Low Frequency) is a conventional single frequency sine wave transmission technology. This reliable design has greater noise immunity to variable ground conditions.

Detector Interference Free technology: The advanced design of the PRO-FIND 35 removes false signals and noise, commonly associated with other pinpointers. DIF technology eliminates interference with an operating metal detector, when it is switched off, by disengaging the coil’s magnetic field.

Specification
Target Identification: Ferrous Tone ID
Sensitivity: Adjustable (5 levels)
Waterproof: Waterproof to 3 m (10-ft)
Audio Indication: On, Off
Vibration indication: Yes
LED flashlight: Yes
Battery: 9V PP3 (included)
Battery life: 30 hours nominal
Length: 237 mm (9.3″)
Weight: 193 g (6.82 oz)
Accessories: Holster, Lanyard

Part# 3226-0003

UPC 811493016405

Minelab Pro-Find 35 Manual

The PRO‑SONIC wireless audio system generates audio using advanced wireless technology to achieve clear sound with minimal perceivable time delay.

The PRO‑SONIC Receive Module features an internal loudspeaker and a 6.35mm (¼”) headphone socket for use with your choice of headphones. It can be attached to your harness or clothing using the metal belt clip.

The PRO-SONIC Transmit Module sends out low-power (mW) radio waves using the ISM frequency band (2.402 – 2.480Ghz). The PRO-SONIC Receive Module senses these signals and establishes a piconet communication network with the Transmit Module, using frequency hopping to eliminate interference from other wireless devices.

The PRO-SONIC system contains everything you need for clear, fast, wireless audio.

PRO-SONIC is compatible with most detectors, and comes with an SDC adapter cable and a handy car charger for charging on the go.

Receive and Transmit modules
Universal Charger (AC and car charger)
SDC 2300 adapter cable
Transmit Module Audio Cable (6.35mm/1/4-inch)
Dual Charging Cable (1 × USB-A, 2 × USB Micro-B)
Getting Started Guide

UPC 811493016221

Minelab PRO-SONIC Headphone Wireless System Manual

Dynamic MicroDriver
The SE215-CL delivers detailed sound with enhanced bass. A detachable cable with formable wire enables easy replacement and a secure, comfortable fit onstage or on-the-go. Sound Isolating sleeves in multiple sizes provide up to 37 dB of isolation and a customized fit.

Evolved from personal monitor technology that’s been road-tested by pro musicians, the SE215 offers detailed sound for personal listening or professional monitoring.

Features:
Sound Isolating Design
Comfortable sound isolating sleeves block up to 37 dB of ambient noise. Sound isolation technology prevents outside noise from interfering with your listening experience, whether on-stage or on-the-go. Shure Sound Isolating Earphones require a proper fit to achieve the best sound.

Unmatched Personalization and Comfort
Ergonomic, Professional Design

Lightweight, low-profile shape with optimized nozzle angle is designed to rest comfortably in the ear.
Over-the-ear configuration keeps cables out of the way.
Detachable Cable with Wireform Fit

Durable Kevlar™ reinforced cable allows easy replacement or customization.
Formable wire ensures secure placement, and over-the-ear configuration keeps cables out of the way.
Gold plated MMCX Connector has a lock-snap mechanism allowing 360-degree rotation for comfortable fit.
Fit Kit Includes

Sound Isolating Sleeves
The role of the included sound isolating sleeves is twofold: blocking ambient noise and ensuring a comfortable customized fit. Because every ear is different, the Fit Kit includes three sizes (S, M, L) of the flex and black foam sleeves. Experiment with the size and style that creates the best fit for you. A good seal is key to optimizing sound isolation and bass response as well as maximizing comfort during extended wear.

Carrying Case
A soft-zip, compact carrying case is included to provide a convenient, tangle-free solution to store and travel with your earphones.

Sensitivity: 107 dB SPL/mW
lmpedance: 20 Ω
Frequency Range: 22Hz – 17.5kHz
Cable Style: 64” Detachable (at ear) with wireform fit
Colors: Available in Clear
Speaker Type: Dynamic MicroDriver

UPC 042406196956

SE215 Manual

Dynamic MicroDriver
The SE215-K delivers detailed sound with enhanced bass. A detachable cable with formable wire enables easy replacement and a secure, comfortable fit onstage or on-the-go. Sound Isolating sleeves in multiple sizes provide up to 37 dB of isolation and a customized fit.

Evolved from personal monitor technology that’s been road-tested by pro musicians, the SE215-K offers detailed sound for personal listening or professional monitoring.

Features:
Sound Isolating Design
Comfortable sound isolating sleeves block up to 37 dB of ambient noise. Sound isolation technology prevents outside noise from interfering with your listening experience, whether on-stage or on-the-go. Shure Sound Isolating Earphones require a proper fit to achieve the best sound.

Unmatched Personalization and Comfort
Ergonomic, Professional Design

Lightweight, low-profile shape with optimized nozzle angle is designed to rest comfortably in the ear.
Over-the-ear configuration keeps cables out of the way.
Detachable Cable with Wireform Fit

Durable Kevlar™ reinforced cable allows easy replacement or customization.
Formable wire ensures secure placement, and over-the-ear configuration keeps cables out of the way.
Gold plated MMCX Connector has a lock-snap mechanism allowing 360-degree rotation for comfortable fit.
Fit Kit Includes

Sound Isolating Sleeves
The role of the included sound isolating sleeves is twofold: blocking ambient noise and ensuring a comfortable customized fit. Because every ear is different, the Fit Kit includes three sizes (S, M, L) of the flex and black foam sleeves. Experiment with the size and style that creates the best fit for you. A good seal is key to optimizing sound isolation and bass response as well as maximizing comfort during extended wear.

Carrying Case
A soft-zip, compact carrying case is included to provide a convenient, tangle-free solution to store and travel with your earphones.

Sensitivity: 107 dB SPL/mW
lmpedance: 20 Ω
Frequency Range: 22Hz – 17.5kHz
Cable Style: 64” Detachable (at ear) with wireform fit
Colors: Available in Translucent Black
Speaker Type: Dynamic MicroDriver

UPC 042406196895

SE215 Manual

• Length : 12-1/2″
• Heavy Duty Plastic
• Black Color

UPC 706569081794

• Length : 12-1/2″
• Heavy Duty Plastic
• Green Color

UPC 706569081817

• Dimensions: 8-1/2” x 6-1/4” x 5-7/8”
• Plastic Material

UPC 706569073980