(17 AWG) A narrow gauge flexible cable using 4 x 20 AWG insulated conductors. Good choice for high frequency components, short cable runs or DC line cords. (Priced Per Foot)

A very popular 4 x 16 AWG flexible speaker cable. Excellent as a STAR QUAD speaker line or for Bi-Amped applications. (Priced Per Foot)

Features:
Robust, Dependable Construction
Brass with Nickel/Gold Plating
360-degree Crimpable Cable Strain Relief
Easy to Solder
Beautiful, Long Lasting Finish

Canare F-15 1/4-inch Male Phone Plug

Canare GS-4 Light Instrument Cable (Priced Per Foot)

Canare GS-6 Instrument Cable (Priced Per Foot)

Hosa GMP-112 Stereo 1/4″ Female to Stereo 3.5mm Male. Converts 1/4″ Stereo Headphone Plug to Stereo Mini.

Connectors: 1/4 in TRS to 3.5 mm TRS

Hosa GMP-113 Mono 1/4″ Female to Mono 3.5mm Male.

Hosa GPM-103 Stereo 3.5mm Female to Stereo 1/4″ Male.

Connectors: 3.5 mm TRS to 1/4 in TRS

Hosa GPP-146 Effects Pedals Coupler. Use to Connect Effects Pedals Together.

Connectors: 1/4 in TS to Same

Hosa GPR-101 RCA Female to 1/4″ Male, 2 Per Pack.

Connectors: RCA to 1/4 in TS

Hosa GPR-104 1/4″ Female to RCA Male. This adaptor is designed to adapt a mono phone plug to a phono jack.

Connectors: 1/4 in TS to RCA

Hosa GPR-123 Right-Angle Adaptor, RCA Female to 1/4″ Male, 2 Per Pack.

Connectors: RCA to 1/4 in TS

Hosa GRA-101 Coupler, RCA Female to RCA Female. 2 Per Pack.

Hosa GSK-116 Speaker Adaptor with Neutrik Speakon Connector on One End and 1/4″ Female on the Other. 16AWG, Approximately 6 inches long.

A genuine Neutrik® speakON connector for a safe and secure connection every time
Oxygen-Free Copper (OFC) conductors for lower resistance and increased signal flow
Intended for high-current applications only, not line level signals

Hosa GXF-132 RCA Female to XLR Female.

Connectors: RCA to XLR3F

Hosa GXM-133 RCA Female to XLR Male.

Connectors: RCA to XLR3M

Hosa GXX-144 XLR Gender Changer. XLR Male to XLR Male.

Connectors: XLR3M to Same

Hosa GXX-145 XLR Gender Changer. XLR Female to XLR Female.

Connectors: XLR3F to Same

Hosa MIT-129 1/4″ Female Hi-Z to XLR Male Lo-Z. 50KΩ High-Z to 200Ω Low-Z.

Maximizes signal fidelity when using impedance mismatched gear
Minimizes high frequency and level loss caused by signal reflections
Eliminates noise and hum caused by an impedance mismatch

Hosa MIT-156 Line Matching Transformer. 600ohm Low-Z to 2500ohm Medium-Z. Matches microphones with XLR connectors to 3.5mm inputs found on Personal Portable Recording Devices, Camcorders, and Computers.

Hosa MIT-435 XLR Female Lo-Z to 1/4″ Male Hi-Z. 200ohm Low-Z to 50Kohm High-Z.

Maximizes signal fidelity when using impedance mismatched gear
Minimizes high frequency and level loss caused by signal reflections
Eliminates noise and hum caused by an impedance mismatch