Furman CN-1800S Power Conditioner-Sequencer

Furman CN-1800S Power Conditioner-Sequencer

AC Voltage Input Range

  • 90-139VAC, 50/60Hz

Maximum AC Current Rating

  • 15 amps (Thermal breaker)

AC Cord

  • 3/14AWG, 10 feet, black, fixed, NEMA 5-15P plug

AC Receptacles

  • Rear Panel Outlets: 2 Unswitched NEMA 5 15R’s (1 duplex), 6 Sequenced NEMA 5-15R’s (3 duplexes each controlled by separate relay)
  • Front Panel: One NEMA 5-15R Convenience Outlet, Unswitched

Surge/Under-Overvoltage Protection

  • AC Surge Protection: SMP
  • Spike Protection Mode: Line to neutral, zero ground leakage
  • Spike Clamping Voltage: 188VAC peak @ 6,000 volts/3,000 amps
  • Response Time: 1 nanosecond
  • Maximum Surge Current: 6,500 Amps
  • AC Undervoltage Protection: EVS, 77VAC+/-3VAC
  • AC Overvoltage Protection: EVS, 145VAC+/-5VAC
  • AC Overvoltage Reset Modes: Manual and Auto-reset (configurable)

AC Filtering

  • LiFT
  • Noise Attenuation: Linear, 10dB @10KHz, 40dB@100KHz, 50dB@500KHz

Operating Temperature Range

  • 5C (40F) to 40C (105F) degrees

Humidity Range

  • <90% rH (Relative Humidity)

User Interface

  • Key-switch: Front panel, 3-position key-switch (On, Off, Remote)
  • Keys: Included, 1 pair
  • Push-button Switch: Front panel, hidden by security cover
  • Circuit Breaker: Front panel, push-button, 15A Thermal Breaker
  • Front panel diagnostic indicators: Primary link, Secondary link, Ethernet, Remote off, Delay 1, Delay 2, Delay 3, Power, Protection OK, Extreme Voltage
  • Front Panel DIP Switches: Front panel. Hidden by security cover, 1 Minute Delay, 2 Minute Delay, 4 Minute Delay, Force Off NO/NC, 12V Mode On/Off BND Mode On, Momentary/Maintained, Primary/Secondary, EVS Reset Auto/Manual
  • Potentiometer: Front panel, hidden by security cover, fine tune delay adjust

Control/Status/Triggering (Rear Panel):

  • Remote Terminal: +5-30VDC In, 12VDC (12mA) Out
  • SmartSequencing: Phoenix 4-Pin Connector, Screw Terminals, Primary & Secondary Links (Current Loop – 1000’ nominal)
  • Remote Terminal: Phoenix 4-Pin Connector With Screw Terminals; +12V, STAT, REM, GND (Class 2 Wiring)
  • Force Off/Delay 3 Terminal: Phoenix 5-Pin Connector With Screw Terminals, FORCE OFF, DELAY 3 (Class 2 Wiring)
  • RS-232 Compatible: Yes, DB-9 Connector
  • IP Addressability: Optional, via BB-RS232 Ethernet/RS-232 Adapter (sold separately) for IP control via Telnet, HTTP, BlueBOLT®
  • Voltmeter: Available with RS-232/Ethernet option, ± 2VAC accuracy
  • Ammeter: Available with RS-232/Ethernet option, ±1A accuracy

Power Consumption (No Load):

  • 10 Watts

Safety Agency:

  • NRTL-C, RoHS Compliant

 

Customer Service Is Our Top Priority!


Furman PL-8C Power Conditioner

Furman PL-8C Power Conditioner

Maximum Output Current: 15 amps
Line Cord: Captive 3/14 AWG, 10 ft. black cord with NEMA 15 plug
Pull-out Lights: Two multi-LED, dimmable lamps
BNC Socket w/Switch: Rear rack lamp, 12VAC 500MA maxx (lamp not included)
Operating Voltage: 90 to 139 VAC
Spike Protection Mode: Line to neutral, zero ground leakage
Spike Clamping Voltage: 188 VAC peak @ 3,000 Amps
Response Time: 1 nanosecond
Maximum Surge Current: 6,500 Amps
Noise Attenuation: 10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz
Dimensions: 19” W x 10.5” D x 1.75” H
Weight: 12 lbs.
Power Consumption: 12 watts
Safety Listing: cTUVus

Price:  $324.95

Customer Service Is Our Top Priority!


Furman PS-REL AC Relay

Furman PS-REL AC Relay

A PS-REL is useful in determining when a certain outlet has come on after a sequenced delay, to extend that outlet’s capacity. It may also be used to extend the capacity of the switched outlet found on many home theater receiver/amps. In this way, a wireless remote can turn on the receiver, which in turn powers its switched outlet, which triggers the PS-REL, which then activates a Furman PS-8R or PS-PRO Power Sequencer, MiniPort, or PowerPort system capable of switching many large power amps or other power-hungry equipment in multiple locations.

Furman PS-REL AC Relay Manual

Price: $79.95

Customer Service Is Our Top Priority!