Minelab Pro-Find 35 Pinpointer Metal Detector

Description

PRO-FIND Series pinpointers help you to accurately locate targets inside a small hole or crevice where a metal detector coil cannot fit. This results in smaller holes, less environmental disruption and faster target recovery time.

Features:

Ferrous Tone ID: Two different responses help you to identify ferrous junk from nonferrous treasure. Great to use with non-discriminating detectors.

Waterproof to 3 m (10-ft): Rugged waterproof design ideal for beach and river pinpointing. The perfect companion for a waterproof detector.

Audio & vibration indication: Audio tones and vibration intensify as the probe approaches the target making target recovery easier, especially underwater!

Adjustable sensitivity: Five sensitivity levels allow you to precisely adjust for maximum depth and minimum noise in all ground conditions. Easily adjustable with separate +/– buttons.

High visibility – with lost-alarm: The PRO-FIND’s bright yellow handgrip is clearly visible for easy location, so you won’t leave it behind after you dig. Quickly locate your forgotten pinpointer with the handy lost-alarm.

Holster & lanyard included: A lanyard and a tough, semi-rigid holster that attaches to most belts will keep your PRO-FIND at the ready.

Probe side sensitivity: Probe side detection area (360 degrees) allows targets to easily be located in the walls of the hole.

Auto power off: To save battery life, the PRO-FIND 35 switches off after eight minutes of inactivity.

LED flash light: Easily see targets when pinpointing in low light conditions and in deep holes.

VLF Technology: VLF (Very Low Frequency) is a conventional single frequency sine wave transmission technology. This reliable design has greater noise immunity to variable ground conditions.

Detector Interference Free technology: The advanced design of the PRO-FIND 35 removes false signals and noise, commonly associated with other pinpointers. DIF technology eliminates interference with an operating metal detector, when it is switched off, by disengaging the coil’s magnetic field.

Specification
Target Identification: Ferrous Tone ID
Sensitivity: Adjustable (5 levels)
Waterproof: Waterproof to 3 m (10-ft)
Audio Indication: On, Off
Vibration indication: Yes
LED flashlight: Yes
Battery: 9V PP3 (included)
Battery life: 30 hours nominal
Length: 237 mm (9.3″)
Weight: 193 g (6.82 oz)
Accessories: Holster, Lanyard

Part# 3226-0003

UPC 811493016405

Minelab Pro-Find 35 Manual