The GOLD BUDDY Highbanker Hopper is attached to the sluice using the GOLD BUDDY Header Adapter making the entire sluice about 4 feet long. Powered by a JOBE 2 1/2 hp, 4-cycle, gasoline pump. The unit can also be set up with a recovery tub to complete a Highbanker recirculating system. Includes 8 feet of 1 1/2 inch intake hose, an intake screen, 25 feet of 1 1/2 inch lay-flat discharge hose, and all necessary fittings.

Jobe Gold Buddy Highbanker With 2.5HP Engine And Trash Pump Parts List

This is Keene’s 175 Combination Gold Dredge – Power Sluice, powered by a 6 HP Honda Engine with the addition of a 3 inch gold dredge suction nozzle, 15 feet of 3 inch suction hose and 17 feet of additional pressure hose to extend the suction system.

Net weight 107 pounds for sluice, hopper, and stand.

The sluice box works extremely well for dredging because the material is pre-classified before entering the sluice box.

Combination units are ideally suited for shallow water areas with the power sluice being so simple to set up and requiring less water then a standard gold dredge to operate. This combination model can be equipped with an air compressor for diving.

This package includes the following components:

1. A52 Hand Sluice
2. HBCKH Hopper 2 1/2 inch coupling (Note Hopper Will Be Gray In Color NOT Black)
3. HBCKF Frame
4. STE Sluice trough extension
5. HBCKE Engine, pump, intake assembly, pressure hose & 25 feet of nylobraid hose coupled.
6. 17’ x 1 1/4” pressure hose & coupled
7. A52DR Gold Dredging Riffle
8. HBCS Classify Screen
9. HBCK25- 2 1/2 inch Dredge Conversion Kit with 15 feet of 2 1/2 inch suction hose including suction nozzle and bracket

Net weight 71 pounds.

Experience amazing recovery with our Miracle Mat sluice riffle. Equipped with an adjustable spray bar and stainless steel mesh on the hopper. Can be powered by the auxiliary outlet on your dredge pump or the included 2.5 hp Honda and pump (P90G)

The P90 pump is driven by a 4 stroke 2.5 horse power Honda engine.
Pumps a maximum of 100 gallons per minute.
Capable of 161 feet of head lift.
Pump size is 1 1/2″ in x 1 1/4″ out

Hopper Screen Size:  3/16 inch woven metal

Sluice Box Size:  12 inches wide by 4 feet long

Pressure Hose Length:  50 feet lay flat hose

Foot Valve:  FVA15

Capacity Per Hour:  .25 cubic yards

Weight:  65 pounds

The new and improved Mini Max Power Sluice Concentrator is the multi-tool of prospecting. We have changed our updated machine from a double pump system to one single, larger pump. The new pump provides not only greater water flow and higher head lift but also a larger diameter pressure hose which creates a higher flow than the double pump system. We’ve also doubled the hose length to 8 feet, added a new ball valve for precise flow control and a screw on connector that requires no tools.

Whether you are working river banks, desert placer’s or just cleaning concentrates for larger dredges and equipment, the Mini Max is a prospecting tool that will always be part of your arsenal. This multi purpose package includes a removable mat for the lower sluice box, converting it to a professional clean up machine simly by sliding out the green rubber riffle and replacing it with Miracle Matting. It is also supplied with an additional finer woven mesh screen on the top hopper for using it as a concentrating system. Another new improvement is that the Mini Max is powered by a single 2200 GPH, 12 volt pump made proudly in the U.S.A. The top hopper is equipped with a flood header that provides smooth water flow through the trough, over a slick plate and in to a 6 inch section of miracle mat that gives you a preview to any captured gold! The top sluice lifts off easily so you can inspect the lower sluice, eliminating the need for cleaning. The material is then washed over a removable classifier grizzly screen, removing the oversized waste gravel. The bottom sluice box is lined with our green rubber riffle that recovers ultra fine gold and can handle larger volumes of material. When used as a concentrating system, the lower sluice is partially covered by oversized expanded metal. When used as a power sluice you can expect a capacity of up to a quarter of a yard per hour and about a third of its capacity when used as a concentrating machine. This Mini Max can also be operated by a small, single gas powered pump such as our P90G Pump Kit. This device is ideal for back packing given it folds up into an compact size of 36 by 14 by 7 inches and weighs under 23 pounds. The four independent legs fold up with our new pin-lock folding system with large wing nuts that make it a breeze to adjust elevation and articulation. Thw Mini Max also includes a mountable flare for use as a hand sluice.

Net weight 23 pounds.

Great for cleaning the concentrates for large trommel operations down to super concentrates.

Can be used to highbank in areas that have large amounts of black sand and garnets that plug up standard riffle configurations.

All sluices are lined with our new rubber molded “Miracle Matting Riffle “ that is acclaimed to be the most effective gold separating device on the market. The sluice box is 6 feet in length and 24 inches wide. The sluice breaks down into two connecting sections, each with supporting adjustable legs. The top hopper is designed with 3/16 inch woven wire mesh to reduce the size of material entering the recovery box. Capacity 1 1/2 cubic yds. per hour.

This allows the operator to work in deeper water with most of the advantages found in a conventional gold dredge.

It’s powered by our HP100 pump, which is direct coupled to a Honda GXH50 engine, offering astounding performance in a package that is lighter and quieter than previous models. There are some obvious advantages that come with using this engine: the famous Honda quality, low oil shut off, and the ease of no longer having to worry about those gas and oil mixtures. In addition, the HP100 is the perfect size and operates at the proper RPM to develop peak water volume and pressure required for optimum performance.

The unit is equipped with a large hopper, containing two spraybars, each with two rows of holes to ensure complete washing of dry and/or clay-bound gravel. Threaded caps allow for easy removal of any debris that passes through the pump, and the grizzly is easily removed to simplify cleanups. Fine gold recovery has been improved due to refinements in riffle profile and timing. Our extensive use of Nomad matting and triple classification makes for an unbeatable combination.

The sluice box is bolted to our sturdy stand for additional strength and the legs are easily adjusted for uneven terrain. Many owners of these machines have successfully mounted them to pack frames increasing their portability. There simply isn’t a more advanced dual-purpose unit available anywhere.

SPECIFICATIONS
1) Engine: Honda GXH50
2) Pump: HP100
3) Sluice Box: 10″ x 35″
4) Jet: 2″ x 1.25″ slip
5) Dredge Hose: 2″ x 10 ft
6) Dredge Pressure Hose: 1.25″ x 10 ft
7) Highbanker Pressure Hose: 1.25″ x 25 ft
8) Weight: 60 lbs.

Float Kit Is Available As An Optional Accessory

This allows the operator to work in deeper water with most of the advantages found in a conventional gold dredge.

This combo falls halfway in size between the 2″ and 3″ models and has incorporated some features from both of them. For example, the stand and legs are longer, but made out of the same size material as the 2″ combo for weight savings. The polyethylene plastic hopper has been reinforced just like the 3″ unit, and the riffles have a stiffening rod on them to ensure a longer life and the sluice box is made of the same thickness of aluminum as the 3″combo making for a very strong unit.

Powered by a Honda GX120 engine and our HP200 pump, this is by far the most powerful 2.5″ combo available anywhere. The HP200 was developed for high volume as well as the working pressure necessary for successful high-banking. This pump was also one of the first of its size which was engineered to be capable of driving an air compressor while still maintaining ample suction power.

All Proline gold dredge/high-banker combos are popular with prospectors who are looking for maximum versatility in a well-built proven design. If the 2″ combo isn’t up to your needs, and if the 3″ combo is a little too large, then the 2.5″ Proline combo might be the perfect choice!

SPECIFICATIONS
Engine: Honda GX120
Pump: HP200
Sluice Box: 12″ x 42″
Jet: 2.5″ x 1.25″ thread
Dredge Hose: 2.5″ x 10 ft
Dredge Pressure Hose: 1.25″ x 10 ft
Highbanker Pressure Hose: 1.25″ x 40 ft
Weight: 95 lbs.

Float Kit Is Available As An Optional Accessory

This allows the operator to work in deeper water with most of the advantages found in a conventional gold dredge.

The two triple row spray bars ensure that all of the gravel, clay, roots, etc. are thoroughly washed and separated before running through the recovery system. The grizzly is designed to be strong yet surprisingly lightweight. Like all of our other grizzly’s, it is removable to allow for easy access to the classifier and black “V” ribbed matting for inspection and/or cleanup. Also, if the combo is going to be operated solely as a gold dredge, the grizzly can be removed to save weight.

The unit is powered by a Honda GX160 engine and Proline’s powerful HP300 pump. This is a higher pressure pump designed specifically for pushing water higher and further, making it ideal for high-banking. Proline supplies 15 feet of gold dredge hose standard, however, many customers upgrade to a longer hose.

Our use of a power jet provides maximum gold dredge vacuum with fewer rock jams compared to combos that rely in the old-fashioned, cumbersome, suction nozzles. This combo can be equipped with an air compressor kit, just like our 3″ gold dredge, if you wish to increase your gold dredging productivity. It’s no surprise that the Proline 3″ combo has seen such wide popularity with prospecting clubs, exploration companies, and miners who require a very versatile machine in a small, rugged package.

SPECIFICATIONS

Engine: Honda GX160
Pump: HP300
Sluice Box: 14″ x 48″
Jet: 3″ x 1.5″ thread
Dredge Hose: 3″ x 15 ft
Dredge Pressure Hose: 1.5″ x 10 ft.
Highbanker Pressure Hose: 1.5″ x 50 ft.
Weight: 155 lbs.
Float Kit Is Available As An Optional Accessory