The Cube is now Shovel Ready!

Take the hassle out of classifying and increase your yield at the same time! The 3/16th” punch plate allows for a 50% material size increase. There are nugget trap/drop riffles to instantly show the larger gold. Simply attach the stand extensions to your existing Cube stand and attach the 5 foot hose (included) and you are ready to go for the gold!

The Gold Banker can be used as a high banker/beach box configuration using the standard 1100 gph pump or optional 2000 gph pump. The Gold Banker works very well as a recirculating unit or can function as a stand alone classifier.

The Gold Banker is constructed of thick ABS material with built in adjustable spray bar. The 3/16 punch plate is anodized or stainless steel and simply slides into the unit. The stainless steel model is the best choice for salt water use.

The Golden Rule is a term coined by Mike Pung: When everything’s the same “Gold Rules”. This saying refers to a way of separating your final concentrates into different size groups or “Classifications” where all individual groups are of different sizes. This process makes it much easier to retrieve your gold since gold is much heavier than everything else. In your classification process GOLD RULES. Sizing piles of different classification has (in the past) been quite a tedious and costly process.

Until now, most classification has been performed by using individual screens ranging from #2 mesh (two squares per inch) to #400 mesh (400 squares per inch) and everything in-between.Imagine how many screens you would need to simply get all the gold from your concentrates! Classification is the key to the Golden Rule and Gold Cube is proud to have the ultimate tool to get even the smallest gold from your concentrates. This unique product can perform 16 size classifications starting with #4 mesh all the way to #400 mesh and it’s all done with one small machine! The beauty of the “Golden Rule” is you easily unscrew the jar and slip in a new screen. This unit is so small it can fit in the glove compartment of your truck and take the place of typical classifiers that you carry in the bed of your truck.

Gold Pan Description: 14″ Pan With Two Riffle Zones (3 each 1/4” Deep Riffles And Micro Riffles) (NOTE: ONE OF THREE COLORS BLUE, GREEN, AND BLACK WILL RANDOMLY SHIP)

Black Sand Magnetic Capacity: 8 pounds (Weight of object must be evenly distributed in magnetic base. Magnets are not continuous through the magnetic surface)

Snuffer Bottle Capacity: 4 Fluid Ounce Plastic Bottle

Glass Vial: Medium Small In Size

1 ton of material per hour running at optimum performance conditions

We run a 1″ 37 GPM gas pump on these (not included)

2 Speed 12RPM (low) 19RPM (high)

Over 50′ of Reverse Helix in the outer barrel

38” Tall x 64” Long x 33” Wide at the base

105 Pounds

Hopper is 22” Wide x 17” Long

DC Battery Required

THIS PRODUCT IS AVAILABLE FOR LOCAL PICKUP ONLY!    For Exceptions, Please Call Us.

.25 tons of material per hour running at optimum performance conditions

Minimum 2500 GPH water pump required (not included)

50 Pounds

Trommel turns at 14 RPM

18′ of reverse helix in the outer barrel

27″ Tall, 48″ Long, 25″ Wide at base

15″ x 13″ Hopper

DC 12 Volt Battery Required

THIS PRODUCT IS AVAILABLE FOR LOCAL PICKUP ONLY!    For Exceptions, Please Call Us.

These quality stainless steel classifiers have rugged plastic bodies with stainless steel screens. They are 12 inches wide at the top and are tapered to fit in the top of a 5 gallon bucket. The overall height is 3 1/2 inches and designed to allow for 4 of the classifiers to be nested with an overall height of only 8 1/4 inches. They are easy to use and a must for proper fine gold recovery.

These quality stainless steel classifiers have rugged plastic bodies with stainless steel screens. They are 12 inches wide at the top and are tapered to fit in the top of a 5 gallon bucket. The overall height is 3 1/2 inches and designed to allow for 4 of the classifiers to be nested with an overall height of only 8 1/4 inches. They are easy to use and a must for proper fine gold recovery.

These quality stainless steel classifiers have rugged plastic bodies with stainless steel screens. They are 12 inches wide at the top and are tapered to fit in the top of a 5 gallon bucket. The overall height is 3 1/2 inches and designed to allow for 4 of the classifiers to be nested with an overall height of only 8 1/4 inches. They are easy to use and a must for proper fine gold recovery.

These quality stainless steel classifiers have rugged plastic bodies with stainless steel screens. They are 12 inches wide at the top and are tapered to fit in the top of a 5 gallon bucket. The overall height is 3 1/2 inches and designed to allow for 4 of the classifiers to be nested with an overall height of only 8 1/4 inches. They are easy to use and a must for proper fine gold recovery.

These quality stainless steel classifiers have rugged plastic bodies with stainless steel screens. They are 12 inches wide at the top and are tapered to fit in the top of a 5 gallon bucket. The overall height is 3 1/2 inches and designed to allow for 4 of the classifiers to be nested with an overall height of only 8 1/4 inches. They are easy to use and a must for proper fine gold recovery.

These quality stainless steel classifiers have rugged plastic bodies with stainless steel screens. They are 12 inches wide at the top and are tapered to fit in the top of a 5 gallon bucket. The overall height is 3 1/2 inches and designed to allow for 4 of the classifiers to be nested with an overall height of only 8 1/4 inches. They are easy to use and a must for proper fine gold recovery.

These quality stainless steel classifiers have rugged plastic bodies with stainless steel screens. They are 12 inches wide at the top and are tapered to fit in the top of a 5 gallon bucket. The overall height is 3 1/2 inches and designed to allow for 4 of the classifiers to be nested with an overall height of only 8 1/4 inches. They are easy to use and a must for proper fine gold recovery.

These quality stainless steel classifiers have rugged plastic bodies with stainless steel screens. They are 12 inches wide at the top and are tapered to fit in the top of a 5 gallon bucket. The overall height is 3 1/2 inches and designed to allow for 4 of the classifiers to be nested with an overall height of only 8 1/4 inches. They are easy to use and a must for proper fine gold recovery.

These quality stainless steel classifiers have rugged plastic bodies with stainless steel screens. They are 12 inches wide at the top and are tapered to fit in the top of a 5 gallon bucket. The overall height is 3 1/2 inches and designed to allow for 4 of the classifiers to be nested with an overall height of only 8 1/4 inches. They are easy to use and a must for proper fine gold recovery.

The Turbopan was designed by Kim Hillier, an Australian geologist and prospector with over 20 years experience in mineral exploration and gold prospecting.

Turbopan eliminates the problem of compaction that happens in the traditional pan because it is basically a circular sluice. Turbopan doesn’t require running water like a sluice, it simply maximizes the effects of gravity. Its shallow depth means it can be used in puddles and troughs. And its unique colour lets you easily see the gold, even when panning in black sand!

The Turbopan gold pan is a sluice in a pan powered by gravity. Move the dirt anticlockwise over the riffles. Even fine gold works down into the central pocket.

The Turbopan is only 6cm deep. Because its shallow, the gold gets to the bottom fast.
It acts just like a “sluice in a pan” – trapping all the gold in its extensive riffle system.

You’ll improve your panning prospects with Turbopan. It’s a better way to pan for gold!

The JOBE 36 is 10 inches wide and 36 inches long weighing only only 8 pounds. The riffles are designed for superior recovery under different water and gravel conditions. The first few riffles are stream riffles to make it easier for the water to start to move the material, followed by Hungarian riffles to enhance recovery if greater stream volume is available. Each sluice includes a section of ribbed black rubber matting for instant gold recognition. A section of diamond cut raised aluminum is included for enhanced fine gold recovery. The riffle latching system is centered for quicker and easier cleanup. The steel riffles are plated for decades of durable service.

Jobe 36 Inch Yellow Jacket Sluice Instructions

The JOBE 45 is 10 inches wide and 45 inches long weighing only 9 pounds. The riffles are designed for superior recovery under different water and gravel conditions. The first few riffles are stream riffles to make it easier for the water to start to move the material, followed by Hungarian riffles to enhance recovery if greater stream volume is available. A section of diamond cut raised aluminum is included for enhanced fine gold recovery. The steel riffles are plated for decades of durable service. Accessories are available to convert the 45 inch sluice into a power hibanker or a dredge. The 45 inch sluice has a removable flare.

45 Inch Yellow Jacket Sluice Manual

This zinc plated steel sluice stand is 18 inches wide, 36 inches long and designed to hold any sluice up to 10 inches wide (up to 14 inches wide if you do not use the provided clamps). It provides a sturdy platform to use the sluice as a highbanker, power sluice, or dredge. The 1/2 inch square tubular legs are independently adjustable for leveling or setting any angle on any terrain.

Jobe Collapsible Sluice Stand Instructions

This is your basic blue plastic 11 inch finishing pan by Falcon.

No riffles makes it perfect for a final clean up gold pan.

No lip on the edge limits waves.

Known as a dipping pan.

Complete with 3 folding sections, expanded aluminum under all the riffles, a detachable flare, and a section of Deep-V vinyl mat. Detachable Shoulder Strap: The carry strap is removable and extends to 45 inches so that it can be used as a hand or shoulder strap. New Riffle Design: The riffles are now a Uni-Body construction precision laser cut from a single piece of 18 gauge steel and then formed into ultra light, sturdy steel riffles. These are then zinc plated for long rust-free service.

Jobe Folding Stream Sluice Instructions

The Gold Mining Gold Wheel. Built-in Agitators Vibrate concentrates to settle gold. Decreases processing time 25%. Self-contained carrying case. Runs all day on three gallons of water. The entire weight of the unit is less than 9 lbs including the self-contained carrying case. The spiral pan is 12 inches in diameter. All components are designed for rugged outdoor use with no lubrication or maintenance. Runs on 12 volts DC. The Gold Miner is the only spiral wheel with this gold grabbing feature. The water volume from the spray bar is adjustable to accurately remove the black sand and leave you with clean gold.

Includes DC Water Pump.

12 Volt Battery Not Included.

The GOLD BUDDY Highbanker Hopper is attached to the sluice using the GOLD BUDDY Header Adapter making the entire sluice about 4 feet long. Powered by a JOBE 2 1/2 hp, 4-cycle, gasoline pump. The unit can also be set up with a recovery tub to complete a Highbanker recirculating system. Includes 8 feet of 1 1/2 inch intake hose, an intake screen, 25 feet of 1 1/2 inch lay-flat discharge hose, and all necessary fittings.

Jobe Gold Buddy Highbanker With 2.5HP Engine And Trash Pump Parts List

Includes one rear leg assembly and two legs. Installing on some JOBE and Keene sluices may require drilling new 1/4 inch mounting holes on the side or bottom. You can use as many of these Extension Sluices as you want making the final product as long as you want in 3 foot intervals.

Has already been upgrade to include miners moss and V-matting instead of carpet.

Gold Genie manufactures three different quality spiral gold wheels. All three are designed to recirculate water with a 12 volt pump which is provided and have the following features. The Gold Genie spiral recovery machines have a quality 18 inch blue spiral pan for easy observation of both gold and black sand. The deep cut spirals with sharp edges allows the system to work wet or dry. The Miner model is designed for high volume applications with adjustable height frame and a plastic skirt which directs all the waste material to the rear. 5 year limited warranty.

The Miner model is the top of the line model.

Gold is caught in a gold pan set in the rear of the unit.

Billet aluminum frame brackets.